Brackish Water Reverse Osmosis Systems BWRO – Industrial & Commercial

WABCO International builds the complete Brackish Water Reverse Osmosis systems, as well as stocks all major components for your maintenance needs. Controlsreplacement cartridge filtershigh-pressure pumps and membrane elements. Reverse Osmosis (RO) technology, also known as hyper filtration, is used in every one of our stock and custom-made reverse osmosis water treatment systems to purify water by removing salts, contaminants and other impurities. Our full lines of Brackish Water Reverse Osmosis Systems are available with a wide range of capacities (up to one million gallon per day) and TDS (up to five thousand parts per million total dissolved solids). In this way our systems set the standards in the water treatment industry. Our friendly knowledgeable engineers and staff are always on hand to help and answer any questions or concerns you may have. We design each of our systems to be plug-and play, with all membranes, pumps, controls, manuals, filters, operating, and piping installed and ready to go.

Brackish Water RO units are used all over the world in many regions where clean potable water is scarce. It is ideal for food and beverage industries, potable drinking water, hospitals, agriculture, hotels & resorts, water bottling & ice making, pharmaceuticals and more. No matter your water application needs, Pure Aqua, Inc. can provide industry standard or custom designed brackish water RO machines.

RO Systems from WABCO International deliver high performance at low life-cycle costs, saving on energy and increasing proficiency. Our pre-engineered systems are manufactured and built with high quality components designed specifically for water purification. Our systems arrive at your facility ready to run with all filters, membranes, pumps, piping, controls and operating manuals.

Request A Quotation

Seawater Reverse Osmosis Systems SWRO

From water-makers to industrial sized Seawater Purification, we offer a full range of systems. Our units are manufactured to eliminate a large amount of salts and other minerals from seawater using R.O. Our equipment does the filtration by employing a high-pressure pump to salty water forcing it through semi-porous membranes denying salts and other organics from flowing through.

The membranes are only tasked to remove dissolved solids while dividing the feed water into purified water and rejected concentrated salts.  The salts and other organics are thrown into the brine stream then flushed into a drain. At the end we have purified water that has 99% less dissolved salts. These sea water RO systems have the power to purify extremely high TDS water.

Seawater RO systems are usable anywhere from yachts to municipalities. It’s important to choose the correct materials of construction to handle seawater (which is highly corrosive). Pure Aqua, Inc. uses materials such as Duplex SS 2205, SS 2207 or Monel, and SS 904 to guarantee a longer operating life and less maintenance.

WABCO International has extensive experience desalting seawater all around the world. Our engineers consult for other manufacturers of desalination equipment. Take advantage of our expertise. Contact WABCO International today for expert, friendly service and top quality support.

Request A Quotation

Containerized / Mobile Water Treatment Equipment

Take the difficulty out of large-scale reverse osmosis plants with a containerized system. By choosing pre-designed, module-sized plants fully assembled in standard 20-ft and 40-ft containers with the option for a 10-ft as well, the complexity and construction of building a water purification plant is no longer necessary. The containerized system is shipped out to where the potable water is needed. With a brief training session, commissioned workers are ready to monitor the systems to produce high-quality potable water within days of delivery.

The plant will include:
– Interconnecting piping between components and systems
– Cabling and wiring of instrumentation inside the container to main control cabinet
– Operation and Maintenance manuals
– General Arrangement 3D/2D CAD drawings

Temperature (“Hot/Cold” Containers)

In hot climate areas – electrical devices and fluids must be kept below 35˚C to ensure good process performance. The temperature inside a container placed under direct sunlight can easily reach 80ºC. Therefore, we offer air-cooled insulated containers with an external sunlight rejection coating.
In cold climate area – fluids must be kept above their freezing points and electrical equipment suffers at temperatures below 5ºC. In this case, we offer insulated containers with heating equipment to solve this issue.

Request A Quotation